#Hair clipper blade sharpening how to#

However, if the need arises, following the above instructions will restore the cutting surface to its original factory sharpened condition.

#Hair clipper blade sharpening how to#

With proper care and maintenance, one might never have to worry about knowing how to sharpen hair clipper blades. It is trapped hair and rust formed from a lack of oil that normally causes clippers to dull and begins pulling hair instead of cutting. This means using a brush to remove all hair after use and applying oil to prevent rust and help the blades to slide against each other effectively. In order to avoid problems of this nature in the future, one should make sure to maintain the unit properly. It will be necessary to adjust the power of the unit and the spacing between the blades to assure the proper honing action takes place. Turn the clipper on and allow it to run for not less than 5 minutes. One should apply a generous amount of machine oil to the metal. Anything more abrasive or coarser can damage the cutting surfaces and cause gaps that will make sharpening impossible. Usually, a toothbrush and/or a small piece of steel wool are sufficient for this purpose. The next step is to clean both blades thoroughly to remove any hair that may have become trapped between them and to remove rust.

In order to sharpen the blades, one must remove these screws and take this blade off completely. This blade is attached to the clipper body by two screws. The outer blade is the one that is normally stationary.

Then it becomes necessary to know how to sharpen hair clipper blades in order to avoid replacing the appliance completely. Unfortunately, abuse and neglect on the part of users can cause blockages to slip in and prevent this from happening as it is supposed to. They hone one another as they run back and forth across each other, maintaining a sharp cutting surface. Have you just found that your hair clipper blades need sharpening? In general, most hair clippers are designed so that the blades are self-sharpening.